Phones answered 24/7Gilroy, CA
Call (833) 490-5225
Urgent? Phones answered 24/7

Well and septic flood water damage in Gilroy

Flood water near a private well or septic system, with the building dried and the household water supply checked before use.

  • Answered 24/7
  • Creek and storm flooding
  • Slab leaks and drying

Get a fast quote

Fastest: call (833) 490-5225. Or send this and we call you back.

Well and Septic

Well and Septic Flood Water Damage: what it covers

Quick answer

Flood water can reach a private well head, a pump house or a septic tank and drain field, and each one can change the safety of the household water. Gilroy Water Damage Restoration answers around the clock, helps keep the equipment and the building separate from the water, and works with the homeowner on testing before the well is used again.

Well and Septic Flood Water Damage illustration for Gilroy, CA

Some properties in the rural ground around Gilroy and San Martin draw their water from a private well rather than a public main, and a flood can reach the well in ways a town water connection never faces. Floodwater can enter a well casing, a pump house or the ground around a well head, and it can carry sediment and contamination into the water that people drink, wash with and cook with.

A septic system is a second concern on the same property. A tank and drain field that sit in flood water cannot treat wastewater properly, and the saturated ground can push sewage back toward the house. A flooded septic system is not something a homeowner should try to judge by eye, because the failure is underground and the signs can take days to appear.

In 2017 the city of Morgan Hill offered to test local wells after a sewer overflow reached Llagas Creek, and that offer is a sensible model for any property near this kind of event. Testing the water before drinking it is the step that matters most, and the restoration work is planned around that result.

Service area
Gilroy & Santa Clara County
Availability
Phones answered 24/7, emergencies first
Warning signs

Signs you need well and septic flood water damage

Do not drink, cook with or brush teeth using water from a well or tap that may have been flooded until it has been tested. Keep off a flooded septic tank and drain field, and do not walk on saturated ground over them. Wear gloves and boots when working near a well head or a pump house, and keep children and pets away from the area. Do not run a generator inside a pump house or near an open well.

  • Muddy, cloudy or discolored water from the tap after a flood, when the water was clear before
  • A sewage or rotten-egg smell from the taps, the drains or the ground near the septic tank
  • Standing water or a soft, spongy area over the septic tank or drain field
  • Wet ground around the well head, a cracked casing cap or a pump house that has taken water
  • Pump cycling more often, or a pressure drop after the flood passed
  • Sediment in a glass of tap water that settles to the bottom of the glass
  • A septic alarm, slow drains or a toilet that gurgles after heavy rain
Our process

How our well and septic flood water damage visit works

  1. Keep the well and septic area out of the flood

    The first step is to stop anyone from using the water and to keep vehicles and equipment off the wet ground near the well and the tank. The technician maps the flooded area, notes where the water stood and marks the zone the crew will avoid.

  2. Check the well head, casing and pump house

    The well cap, the casing and the pump house are inspected for cracks, open seals and standing water. A well that flooded can take contamination through a damaged cap or a low opening, and those points are sealed or repaired by a licensed well contractor.

  3. Test the water before anyone drinks it

    A sample is taken and tested for bacteria and other contamination before the well is used again. The homeowner is told the result and what it means. Until the water is cleared, bottled water or a safe supply is used for drinking and cooking.

  4. Assess the septic tank and drain field

    The septic tank and drain field are checked for saturation, damage and blockage. A septic service provider decides whether the system can keep working or needs to be pumped, repaired or replaced, and the restoration crew works around that decision.

  5. Dry the building and clear the water from the home

    Once the outside water is controlled, the building is pumped and dried to readings. Plumbing that carried flood water is flushed and checked before the taps are trusted again. The final readings and the water test results are kept together.

Is the water from my well safe after a flood?

Not until it has been tested. A flood can carry bacteria and sediment into a well through a damaged cap or a flooded casing, and the taste and color of the water do not show whether it is safe.

Clear water can still carry bacteria, and the test is the only reliable way to know. Until the result is back, the water should be boiled for drinking, or a bottled supply should be used for drinking, cooking and brushing teeth. Showering is generally less risky, but the water should still be checked before a child or a person with a weak immune system uses it.

A test that comes back positive is not the end of the well. The well contractor decides whether the contamination came from a damaged cap, a flooded casing or the surface water, and the repair is made at that point. Once the well is repaired, it is flushed and tested again before the water is used normally.

How can a septic system be damaged by a flood?

Saturated ground stops the drain field from treating wastewater, and a flooded tank can be pushed out of place or cracked. Water entering the tank also adds to the load the system cannot handle.

A drain field depends on unsaturated soil to filter and absorb wastewater. When the ground is flooded, the field cannot do that job, and the wastewater rises back toward the house or the surface. The field may take weeks to recover once the ground dries, and it may not recover at all if the soil has been compacted.

The tank can also float or crack when the ground around it is saturated. A septic service provider inspects the tank and the field, pumps what needs pumping and decides whether the system can be repaired or needs replacing. The homeowner should not put more water through the house until that assessment is made.

Should I pump out a flooded well or septic system myself?

No. Pumping a septic tank or working on a well head without the right training can spread contamination and damage the equipment. Both jobs belong to licensed providers.

A homeowner who tries to pump a flooded septic tank can pull the wastewater into a bad state and cause the tank to be damaged. Working on the well pump or the casing can introduce contamination into the water. Both jobs have specific steps, and each one is safer when handled by the provider who will also check the result.

The restoration crew can keep the house dry and the flood out of the rooms while the well and septic work is arranged. That coordination is usually the most useful thing the homeowner can ask for in the first days after the flood.

What moves the price of well and septic flood work up or down?

Whether the well head or the septic tank was reached by water, how much of the house plumbing needs flushing, how deep the water stood and the testing and pumping the provider recommends. The price is explained and approved before work starts.

A well that only needs its cap checked and its water tested is a different job from one with a damaged casing and a pump that has taken water. The number of separate providers, the testing and the time needed for each step all change the scope, so the plan is written out before any work begins.

The building matters too. A house with the plumbing running through a flooded crawl space is more work than one where the water stopped at the outside of the foundation. The technician explains which parts of the work the building requires and which parts are the well or septic provider's to decide.

When is it safe to use the taps and the toilets again?

When the well water has tested clean, the plumbing has been flushed, the septic system has been cleared, and the house has been dried to readings. Each step is confirmed before the taps are used normally.

Taps and toilets should not be used until the water supply is confirmed. Flushing the plumbing clears the sediment and any contamination from the lines, and the water is run until it runs clear. The test result comes after the flush, so the sample is taken from the water the household will use.

The septic system is brought back into use only after the provider confirms it is working. A toilet that is flushed into a system still recovering from a flood can push waste back into the house, so the use of the house plumbing waits for that confirmation.

Options

Types and options for well and septic flood water damage

Flood water over a well head or pump house

A well head that stands in flood water can take contamination through its cap or its casing. The pump and the pressure tank may also be affected. The water is treated as unsafe until it has been tested and cleared, and the equipment is checked by the well contractor.

A flooded septic tank or drain field

Saturated ground stops a drain field from treating wastewater, and a flooded tank can lift or crack under pressure. The system is pumped and assessed by a septic provider. The house is kept off the system until that assessment is complete, so no more water is sent into it.

Sewage that reached a well-supplied house

When sewage gets into a house that runs on a well, the water inside the house has to be flushed and tested as well as the building. The plumbing is drained, the water heater is checked and the taps are tested before use.

Flood water that reached the household plumbing

Flood water can enter plumbing through a vent, a low fixture or a cleanout, even when the well itself is fine. The lines are flushed, the faucets are run and the water is tested once the building is dry.

Santa Clara County

Why well and septic flood water damage is different in South County

San Martin and the rural ground around it include addresses that rely on private wells, and a well near a creek or a drainage channel can be exposed to surface water. A flood that reaches the ground around a well is a water-supply problem as well as a building problem, which is why the testing step is treated as part of the restoration.

The 2017 San Martin event that sent sewage into Llagas Creek is the local reason for well testing in this area. The city of Morgan Hill offered to test local wells afterward, and the same caution applies to any well that stood in the path of flood water or sewage. For the sewage side of the same event, see sewer backup cleanup.

Rural properties near the creeks in this valley can take water across a wide area, and the outside of a home is part of the loss as well as the inside. Where the flood water came from a creek and reached the house, the approach follows Llagas Creek flood water damage.

One call and it gets handled.

A crew is dispatched as fast as one is available, and you approve the estimate before any work starts.

Related

Sewer Backup Cleanup

Sewage that backs up through floor drains or toilets in Gilroy homes, with contaminated material removed and surfaces cleaned before drying.

Llagas Creek Flood Water Damage

Flood response for buildings on the Llagas Creek system, from pumping and mud removal through to monitored drying.

Mold After Water Damage

Mold that grows in wet walls, subfloors and cavities after a water loss, found by readings and removed where it has taken hold.

Pajaro River Flood Damage

Recovery work for buildings that took Pajaro River flood water, from mud and contents through to a dry, clean structure.

Guides

Read before you book

FAQ

Well and Septic Flood Water Damage FAQs

The flood has gone down. Can I use my well water for drinking?

Not until it is tested. Use bottled or otherwise safe water for drinking and cooking in the meantime. Call (833) 490-5225 to arrange the restoration and ask the well contractor for a water test, then follow the result.

How do I know if my septic system was damaged?

The signs include slow drains, a sewage smell near the tank, standing water or soft ground over the field and a backup into the house. A septic provider inspects the system and gives the result. Do not rely on the look of the ground alone.

Do you test the well water yourselves?

The restoration crew coordinates the water test but the sample is taken and analyzed by a qualified testing service. The result tells the homeowner whether the water is safe to use, and the crew plans the rest of the work around that result.

Will flooding reach my well if it is on high ground?

It is less likely on high ground, but a well can still be affected by surface water running downhill or by a damaged cap. The site is checked on the day rather than assumed to be safe because of its height.

Who pays to repair a damaged well?

The work depends on the damage and the provider. A well repair is usually a separate job from the building restoration, and the homeowner's policy may or may not respond to it. Keep the test results and the provider invoices with the claim records.

How long does it take to get the household water back?

It depends on the well, the septic system and the results of the testing. The water is flushed and tested before it is declared safe, and the crew and the provider will tell you when each step is complete.

Can you clean the inside of the house if the well is still being fixed?

Yes. The building can be pumped, cleaned and dried while the well work is arranged. The plumbing is kept closed off until the supply is confirmed, so the house is not refilled with untested water.

WhatsApp