What changes once the flood protection project is finished?
Less water in the places the project covers, by design. The published aim is protection for about 1,100 homes, 500 businesses and 1,300 acres of farmland along 13.9 miles from Gilroy through Morgan Hill, including San Martin.
Flood protection works on a design standard, not on a promise. A channel improved to carry a given flow carries that flow; a larger storm, a blockage or a failure somewhere upstream still produces water on the ground. Buildings outside the improved reaches see no change at all from work inside them.
The practical reading for a homeowner is that the project changes the odds and not the plan. Knowing where your building sits relative to a creek, which way the ground falls and where the water came in last time remains the most useful information you can have before the next wet week.
Street flooding happened but my house looks dry. Should I check anything?
Yes, three places. The bottom of the drywall on the walls nearest the water, the garage and utility areas, and the crawl space or under-floor void if the building has one.
Water that has entered a wall cavity from below gives very little away at eye level. A meter reading at the base of the drywall settles it in seconds, and a torch through a crawl space hatch will show whether insulation is hanging down or wet. Both checks are quick and both find things people miss.
The reason to look now rather than later is that damp framing and wet insulation do not improve on their own in winter. Outside air in a wet week carries plenty of moisture of its own, so a closed, cool under-floor space has almost no drying capacity. What gets found in week one is a smaller job than what gets found in week four.
How is the work priced on a rural property?
By what the building needs rather than by a fixed menu, and it is set out and approved before anything begins. No figure is quoted here because the drivers differ so much between buildings.
The things that move it are the ones a crew can see on arrival: how much floor area got wet, how deep and how long the water stood, how much material has to be removed, whether a crawl space or a second structure is involved, and how far equipment has to be carried. Outbuildings and long driveways add handling that a town address does not.
What stays the same everywhere is the order. The scope is explained, you agree it, and the removal and drying follow. If a reading changes the picture part way through, that is explained too, before extra work is done rather than after.
Is Llagas Creek water contaminated?
It is handled as contaminated. Creek water has crossed ground, roads and farmland, and this creek has also received a sewage spill in the past, so the cautious category is the right one.
In January 2017 a Morgan Hill sewer line running through San Martin released about 204,000 gallons of sewage into Llagas Creek, a figure reported by the state water board and carried in a regional newspaper, and the city afterward offered testing to nearby well owners. That is history rather than a live hazard, but it is a fair reason not to assume creek water is clean.
Practically, the category decides the method. Porous materials below the water line are removed instead of dried, hard surfaces are cleaned before they are dried, and anyone working in the space wears boots and gloves. If a backup inside the building is involved as well, sewer backup cleanup covers that work.