Phones answered 24/7Gilroy, CA
Call (833) 490-5225
Guide

How to check a contractor before any repair starts

How to check a California contractor license after water damage, which repair stages need one, and where the state board lookup is kept.

Illustration for the guide "How to check a contractor before any repair starts" (Gilroy, CA)
Short answer

After water damage the drying crew and the repair contractor are often different companies, and the repair side is where California licensing matters most. This guide explains which work needs a licensed contractor, how to check a license with the state board and what to settle in writing before anything is signed.

Key takeaways

  • Repairs to the structure and finished surfaces generally call for a licensed contractor in California.
  • Check any license number with the Contractors State License Board at cslb.ca.gov before you sign, not afterward.
  • Mold and some hazardous material work can need separate certification on top of a contractor license.
  • A drying company and a repair contractor answer for different work, so ask each one what it holds.
  • Get the scope and the license number in writing, and keep both with the insurance file.

Which part of the job needs a licensed contractor?

Repairs to the structure and to finished surfaces are the part of the job that most often calls for a licensed contractor. Drying and extraction are handled under separate questions, and the crew should say which stage it performs.

Water damage usually ends with repair work: drywall replaced, cabinets reset, flooring laid and framing opened or strengthened. In California that kind of construction work is generally performed by a licensed contractor, and a homeowner who hires an unlicensed person for it can find the job hard to correct later.

The line is not always obvious on a live job. A crew that dries a wall is not building it back, and a repair company may need to open framing to check what the drying reached. Ask each company which stages it performs and whether it holds the license that stage requires.

Keep the stages separate in your own mind. Extraction, drying and removal are one set of questions, and rebuilding is another. Mixing them up is how a homeowner ends up with a repair signed by someone who was only ever asked to dry the house.

How do you look up a license in California?

The Contractors State License Board keeps the record, and it is the source to check, not a card or a page a contractor sends you.

The Contractors State License Board licenses contractors in California. Its lookup at cslb.ca.gov shows whether a license is active, the classification it covers and any action recorded against it. Search by the license number the contractor gives you and by the business name, so the two can be compared.

Check the record yourself rather than relying on a copy the contractor supplies. A printed certificate can be out of date, and a number read aloud over the phone can be misheard. The board's record is what counts when a dispute arises.

Save the lookup page or note the date you checked. If the status changes later, the record you saved shows what was true when you signed, and that can matter if a job runs into trouble.

Is there a dollar threshold that makes a license required?

California sets a dollar threshold for when a license is needed, and different official releases have stated it differently. This guide does not print one. The board's current rules are the place to confirm it.

The board's published material has given different threshold figures in different releases, and some local summaries repeat older numbers. An out-of-date figure is worse than none, so this page does not repeat one. Ask the board directly, or read its current release, before deciding whether a job needs a license.

The practical answer is simpler than the threshold. Structural repair and most finished-surface work should be treated as licensed work whatever its size, and a contractor who argues that a particular job falls below a line should be asked to show that in writing from the board.

Keep this in mind when comparing bids. A bid that is lower because the contractor does not hold the license is not a saving. It moves the risk back to you, along with any defect that appears once the walls are closed.

What does a mold or hazardous material job add?

Mold and some hazardous materials can need separate certification. That is in addition to any contractor license the repair needs.

Mold removal and the handling of some hazardous materials may need certification that a general contractor does not hold. Certification is a different credential from a contractor license, and a company can hold one without the other.

When a job includes visible mold or older materials that may be hazardous, ask which certification applies to the removal and who holds it. Ask to see it, and check it with the issuing body rather than accepting a copy handed to you on site.

Testing and removal are not always done by the same people, and that separation is useful. A company that both tests and removes can have a reason to find more work, so ask how the assessment is documented before the removal starts.

What should a written contract include?

A written scope with the contractor's license number, the work described stage by stage and a clear record of what changes after the start.

The contract should name the contractor and its license number, the classification the license covers and the address where the work is done. Describe each stage in plain terms: what will be removed, what will be rebuilt and what finish will be used. A vague scope is hard to enforce later.

Ask for changes in writing before they are done. Extra removal or an unexpected repair found behind a wall is common in water work, and a written change order keeps the record straight for both sides and for the insurer.

Keep a copy of the signed contract, the change orders, the lookup record and the invoices with the claim file. Those documents answer most of the questions that come up after the work is finished.

What if a contractor is not licensed?

Stop before signing and check the record. An unlicensed contractor doing work that needs a license leaves the cost of any defect with you.

If the lookup shows no license, or a license that does not cover the work, do not sign until that is resolved. A contractor who says the license is pending or held under another name should show a record from the board, not a promise.

Report concerns about unlicensed work to the Contractors State License Board. Its consumer information is the right place for a complaint, and a written record of the contact helps if the matter goes further.

Finding another company takes a day, and a repair that has to be redone takes far longer. Water work moves quickly, so switching can feel hard in the moment, but a short pause to check the record is worth more than a rushed signature.

Who should you ask about the drying stage?

The drying company answers for the drying. Ask what it holds for extraction and drying, which stages it hands off and how it documents moisture until the structure reads dry.

Drying and extraction have their own questions. Ask the company what it holds for each stage it performs and what it does not perform. A company that is clear about its limits is easier to hold to them.

Ask for the moisture readings and the drying plan in writing before the equipment is set, and for the readings at each visit. When the structure reads dry, the record marks the end of that stage, and the repair contractor can start from a known point.

If a drying company also offers to do the rebuild, ask it to say so plainly and to explain how the two records would be kept apart. Two separate companies with two separate records keep the homeowner in the position of choosing.

Where do the state board and the insurer fit in?

The state board regulates the contractor and the insurer handles the claim. Keeping those two roles apart makes both easier to work with.

The board can tell you whether a contractor is licensed and whether a complaint has been recorded against the license. It does not decide the claim or coverage. Those questions go to your insurer under your policy.

Share the license record and the written scope with the insurer, so the adjuster sees the same work you signed. If a question arises about who is qualified to do a stage, the state record is the answer, not the adjuster's opinion or the contractor's.

If the insurer or the contractor disagrees with the scope, put the disagreement in writing and attach the readings. Two written positions that point to the same evidence usually settle sooner than two verbal ones.

Frequently asked questions

Can I hire a contractor who is licensed in another state?

A license from another state does not license work in California. Check the California record directly, and confirm that the classification you need appears on the board's lookup for the work in question. Ask for the number in writing before the visit, so the check can be made before anyone sets foot on the job.

Does a drying company need a contractor license?

That depends on the stage and on the rules that apply to it. Ask the company what it holds for drying and extraction, and check any credential it names with the body that issued it.

Does a licensed contractor guarantee the work?

A license is a regulatory credential, not a guarantee. The written contract sets the terms, and the board's record shows the license status and any recorded action.

What if the contractor is already on site?

Ask for the license number, check it on the board's lookup that day and write down what you found. Do not let work proceed on a wall or floor that is about to be closed until the scope is in writing.

Do I need to check the license again after the work starts?

It is worth a second look if the scope changes or a new company arrives on site. A record checked on the first day can change, and the lookup takes only a minute.

Who decides which permits a repair needs?

The local building department sets permit rules, not this guide. Ask the contractor which permits the work needs and confirm them with the department before construction begins.

Is a salesperson the same as the contractor?

Not always. A salesperson may take the order and hand the work to another company. Get the legal name on the contract, check the license for that name, and ask who will be on site.

Sources

  1. Contractors State License Board

This guide is general information for Santa Clara County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.

One call and it gets handled.

A crew is dispatched as fast as one is available, and you approve the estimate before any work starts.

Keep reading

More guides

WhatsApp